Three plans, built on the Service Yantra Preventive-Maintenance Parameter Master — 174 checked parameters spanning 14 building systems. Give us your site's size, age and network zone, and we'll work out an indicative ₹/sq ft and point you to Basic, Pro or Advanced Care.
Your site
Up to 2,000 sq ft — a single site. Larger estates run on an inspection-priced contract.
Older estates carry more failure risk, so preventive intensity — and rate — rise.
Tier-2, partner present. Denser networks mean shorter travel and a lower rate.
Indicated preventive rate
₹2.48/ sq ft / month
The essential core: life-safety and MEP systems on a baseline preventive calendar.
Indicative model, not a quotation. The Yantra Inspection confirms scope and rate against your assets.
All three sit on the same contract and the same platform, with every visit photo-checked against a checklist pulled from the Parameter Master. Move up a tier and you get more systems covered, a tighter visit cadence, and deeper evidence — nothing hidden, nothing sprung on you later.
Basic Care
Core coverage — safety and MEP essentials
₹2.00/ sq ft / mo
126 parameters · 8 systems · standard cadence
Pro Care
Broader coverage, closer watch
₹3.50/ sq ft / mo
157 parameters · 11 systems · tighter cadence
Advanced Care
Full estate coverage, with predictive maintenance
₹5.00/ sq ft / mo
174 parameters · 14 systems · full + predictive
Every plan draws from this same master list — just a different slice of it. Basic locks in the essential core; Pro and Advanced build outward from there, adding systems, tightening cadence, and going deeper on evidence.
Fire & Life Safety
16 parameters
Electrical
28 parameters
HVAC & Refrigeration
22 parameters
Plumbing & Water
22 parameters
DG Set
14 parameters
Building Envelope & Civil
13 parameters
Safety & Compliance
7 parameters
Common Area & Amenities
4 parameters
Vertical Transportation
12 parameters
Security & Access
11 parameters
IT / Network
8 parameters
BMS / Automation
6 parameters
Energy & Sustainability
6 parameters
Soft Services
5 parameters
The starting point is ₹2/sq ft, for a site that's standard, newly built, and in a dense network zone. From there, we apply an age factor and a zone factor, keeping the output somewhere in the ₹2–5/sq ft range, and round it to the closest plan — ₹2 for Basic, ₹3.5 for Pro, ₹5 for Advanced. Treat it as a starting estimate; the Yantra Inspection replaces it with a number based on your actual estate.
They all pull from one Parameter Master — the difference is how much of it each plan covers. Basic handles the essentials: 8 safety and MEP systems, 126 parameters. Pro goes further, folding in vertical transport, security and IT for 157 parameters, checked on a tighter schedule. Advanced covers the full list — all 14 systems, all 174 parameters — plus automation, energy/ESG, soft services, predictive signals, and a complete compliance evidence file.
Age brings more asset drift and a higher chance of failure, so holding the same uptime takes a more intensive maintenance cadence. The rate climbs with age to account for that extra effort. Again, the Yantra Inspection nails down the real figure against what's actually on your site.
Where our territory coverage is already dense — metro and tier-1 cities — technicians travel less, so the rate comes in lower. In thinner or unserved areas, mobilization costs more, so the rate goes up. The Yantra Inspection confirms the precise number once it knows your locations.
That's the limit of what the selector can model. For multi-site estates or larger footprints, the Yantra Inspection takes over — one contract spanning 25+ service categories, priced against asset density rather than square footage alone.
We run the Yantra Inspection against your site's 70-item asset inventory, then hand you back a scoped plan and rate — all before you're asked to commit to anything.